HDD Sondes

SS-86 SwP sonde for the Ditch Witch SubSite 750 or 752 location system. Power switches to high mode, with a depth of up to 25 meters. Accuracy 0.1%.

Angle accuracy ±0.1%

High-precision probes are essential for laying sewer and storm drains.

Working depth 22 or 25 meters, depending on power mode

In standard mode, the probe operates as SS-86: 22 meters deep, 150 hours of operation from a lithium battery.

In high power mode, the probe operates at a greater depth and with higher power consumption: 25 meters depth, 75 hours of operation from a lithium battery.

Switching to high power mode:

1. Lift the operating probe upside down for 7 seconds;

2. Then lower it upside down for 7 seconds;

3. Raise it upside down again for 7 seconds.

After that, use the locator to monitor the increase in power (increase in signal level), then perform the standard calibration procedure.

After replacing the batteries, the transmitter will resume operating at the standard power level. To switch it to high power mode, repeat the procedure described above. There is no need to recalibrate the locator.

1 year warranty. Free shippng.